Factory Reset Seiki Tv Without Remote
If you have a Seiki TV and have lost your remote, there is a way to factory reset it without using the remote.
Contents
How to Factory Reset Your Seiki TV Without the Remote
If your Seiki TV is acting weird or you just want to restore it to its factory settings, you can do so without the need for a remote. Here’s how:
1. Press and hold down the Seiki TV’s power button for about three seconds until the TV turns off.
2. Wait about two minutes until the TV powers back on.
3. Press and hold down the MENU button on the front of the TV for about four seconds until the main menu comes up.
4. Use the arrow buttons on the remote to highlight ” factory reset ” and press the OK button.
5. Use the enter button on the remote to select ” factory reset ” and press the OK button.
6. Use the arrow buttons on the remote to highlight ” confirm ” and press the OK button.
7. Press the power button on the TV to reset the TV.
8. The TV will reboot and you’ll be back to the main menu.
Unplug Your TV
First, unplug your TV from the power outlet. Make sure there is nothing plugged into the TV’s USB port.
Next, remove the screws that hold the back of your TV panel in place.
gently pull the back of the TV off. You will see a motherboard, batteries, and other internal components.
There are three screws that hold the internal memory on the back of the TV. Remove these screws.
Now, disconnect all the cables from the TV.
reconnect the power cable, HDMI cable, and USB cable.
Replace the screws that held the back of the TV panel in place.
plug the back of the TV panel into the wall, and screw it in place.
Turn on the TV and press the power button.
Use a Smartphone or Computer to Reset Your TV
- If your TV is not responding to manual reset buttons or if it is not possible to power on the TV using the power cord, then you will need to use a smartphone or computer to reset the TV.
2. To reset your TV using a smartphone or computer, first locate the TV’s power cord. Next, locate the TV’s main power switch, usually located on the front or side of the TV.
3. Once you have located the power switch, turn the TV on by pressing the power switch. Once the TV is on, press theMenu button on the TV remote.
4. On the TV’s Menu screen, press the “Factory Reset” button. If the TV asks you to confirm the factory reset, press the “Yes” button.
5. Once the TV has reset, the TV will power off and will need to be turned on again using the power cord or main power switch.
First, make sure that your TV is turned on and in front of your TV.
Next, press and hold the MENU button on your TV.
Next, release the MENU button and press the down arrow on your TV remote until “Factory Reset” is displayed.
Press the ENTER button on your TV remote to confirm the reset.
Your TV should now be reset and ready to use.
Use a Universal Remote to Reset Your TV
Warning! This procedure will erase all data on your TV. If you do not want to lose your data, please do not proceed.
If your TV is not responding to your remote, it may be time to factory reset it. To do this, follow these steps:
1. Look for the ‘RESET’ button on your TV. It should usually be on the front or back of the TV.
2. Press and hold the button until the TV turns off.
3. Remove the TV power cord from the wall outlet.
4. Wait a few minutes until the TV turns back on.
5. Use your remote to press the RESET button on your TV.
6. The TV will start flashing different colors. Keep pressing the RESET button until the TV turns off.
7. Reattach the TV power cord to the wall outlet and wait a few minutes until the TV turns back on.
8. You are now ready to use your TV the way it was before the reset.
How to Reset Your TV if You’ve Lost Your Remote
If you’ve lost your remote for your seiki tv, don’t worry! Here’s how to reset your tv without using the remote.
First, make sure that the tv is turned off and unplugged from the wall. Then, remove the screws that hold the top cover in place. Next, remove the top cover. Next, locate the power button on the back of the tv and press it while pulling the power cord out of the tv. Hold the power button down for about 10 seconds until the tv reboots. Once it reboots, go to the main menu and select “Settings” then “Remote Control.” Press the “OK” button on the remote to set up the remote. Now, you can use the remote to change channels, volume, and more!
Conclusion
If your Seiki TV is not working, you may be able to fix it by doing a factory reset.
