How To Make A Disposable Vape Charger

How To Make A Disposable Vape Charger

Looking for a way to save money on your vaping? Check out our guide on how to make a disposable vape charger! These chargers are super easy to make and can save you a lot of money on your vaping habit.

Contents

How to Make a CHARGER for DISPOSABLE VAPES! (+How to Charge a Posh Plus and Mr.Vapor )

Get the supplies you need

You will need:

  • A standard USB charger
  • A disposable electronic cigarette battery
  • A small piece of metal
  • A drill
  • A screwdriver
  • A sturdy piece of wood

    1. First, you will need to get a disposable electronic cigarette battery. Search for a reputable brand and make sure to get a battery with a high capacity – at least 2000mAh.

    2. Next, you will need to drill a small hole in your metal piece. This hole should be big enough to fit the USB charger’s cable inside, but small enough that the battery can still fit snugly.

    3. Now, insert the USB charger into the hole in the metal piece and plug it in. You’re ready to vape!

    4. To use the charger, simply place your disposable electronic cigarette battery into the charger and plug it in. The battery will start to charge immediately and will be ready to use in no time!

Cut the wire to size

Strip one end of the wire
Twist the strip around the wire until it is tight
Crimp the strip
Cut the excess wire

Now you have a disposable vape charger!

Strip the insulation

Start by stripping the insulation off of the wire. This can be done with a wire stripper or a pair of scissors. The insulation should be cut about 1 inch from the end of the wire.

Make the coil

Now that the insulation is off of the wire, we can start to make the coil. The coil is made up of two pieces of wire – a positive wire and a negative wire. The positive wire is the top wire and the negative wire is the bottom wire.

The positive wire is inserted into the positive terminal of the charger and the negative wire is inserted into the negative terminal of the charger.

Now we need to wind the coil. To do this, we will take the top wire and loop it around the bottom wire several times. Then, we will take the bottom wire and loop it around the top wire several times.

We need to make sure that the coil is tight so that the voltage doesn’t leak out. To make the coil tighter, we can use a screwdriver or a piece of wire.

Now we need to connect the coil to the battery. To do this, we need to connect the negative wire to the battery and the positive wire to the battery.

Finally, we need to connect the charger to the battery. To do this, we need to connect the positive wire to the charger and the negative wire to the battery.

Attach the ends of the wire

of the wire Insert the other end of the wire

of the wire Screw the battery onto the end of the wire

onto the end of the wire Twist the wire around the battery

around the battery Plug the charger into an electrical outlet

into an electrical outlet Close the battery cover

cover Shake the battery to charge it

to charge it When the battery is fully charged, unscrew the battery cover

When the disposable charger is not in use, screw the battery cover back on

back on Store the disposable charger in a safe place

in a safe place Always use a new, fresh battery when using a disposable charger

Test your new disposable vape charger

Step 1: Gather the materials you will need

  • A disposable vape charger
  • An USB cable
  • A power source (such as a USB wall charger)

    Step 2: Prep your disposable vape charger

    If you are using a new disposable vape charger, you will need to prep it before using it. First, make sure that the charger is properly charged. Plug the USB cable into the power source and into the disposable vape charger. The green light on the charger should turn on, indicating that it is properly charged. If the green light does not turn on, check the connection between the USB cable and the charger.

    Second, make sure that the disposable vape charger is properly configured. On the back of the charger, there are several buttons. Click the button that says “Power.” This will open the configuration menu. Check the box that says “USB.” This will configure the charger to use the USB cable to power it.

    Finally, make sure that the disposable vape charger is properly inserted into the USB port on your computer or other power source. Click the “Start” button on the configuration menu to begin using the disposable vape charger.

    Step 3: Charge your disposable vape charger

    Once you have properly prepped and configured your disposable vape charger, it is time to charge it. Plug the USB cable into the power source and into the disposable vape charger. The green light on the charger should turn on, indicating that it is

Conclusion

Making your own disposable vape charger is a great way to save money and avoid potentially harmful chemicals. By using a disposable charger, you can avoid having to clean your regular charger and prevent any potential fires.

Also Check  Is TenQubit a Legit Quantum Computing Company

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *